If you have been considering garage roller shutters installation, then it’s time to stop thinking and start acting. With the help of this DIY guide, you’ll be able to install your own garage roller shutters in no time flat! If you follow these simple steps and tips, you’ll be able to enjoy the benefits of this great alternative to traditional roller shutters in no time at all!
Step 1: Measure Up
The first step is to measure the opening of your garage door. You’ll need to know the width and height of the opening in order to select the right size roller shutter. Once you have your measurements, write them down or take a picture so you don’t forget! Next, determine what kind of garage door opener you will be using on your new garage roller shutters installation. Most newer homes use an electric opener that has been integrated into the garage wall and will require minimal installation when it comes time for installing the garage roller shutters.
Step 2: Select The Right Shutter
Before you start your garage roller shutter installation, you need to make sure you have the right shutter for your needs. There are a few things to consider when making your selection, such as the size of your garage door, the type of material you want, and the budget you have. Once you’ve considered all of these factors, you’ll be able to narrow down your choices and select the best shutter for your needs. When selecting the perfect shutter, keep in mind that roll-up shutters tend to be less expensive than roll-down shutters because they don’t require special engineering or specialized equipment. You also need to take into account how much time you’re willing to spend on installation; if it’s not going to take more than an hour or two then it’s probably worth choosing a simpler model.
Step 3: Fix the Shutter to Your Existing Frames
Most garage roller shutters come with an easy-to-follow installation guide. But if you’re not the handy type, don’t worry – we’ve got you covered. Here’s a quick step-by-step guide on how to install your new garage roller shutters:
- Measure the opening of your garage door and cut the shutter to size.
- Fix the brackets that came with your shutter onto your door frames.
Step 4: Seal Off Windows & Doors
To prepare your garage for installation, you’ll need to seal off any windows and doors. This will help ensure that the roller shutter is properly sealed and insulated. You can use weather stripping or caulk to seal off any gaps. You may also want to cover up any electrical outlets with a plastic plug so no debris falls into them.
The next step is securing the top of the track by using screws or bolts through the railings of your door opening. For wood-framed doors, predrill holes are recommended before installing screws through drywall and framing into studs in your wall.
Step 5: Seal off Gaps with Duct Tape
Once you have the garage roller shutter in p犀利士
lace, it’s important to make sure there are no gaps. Gaps can let in light, dust, and pests. To seal off any gaps, use duct tape. Apply the duct tape around the edges of the shutter, making sure to press it firmly into place. The adhesive on the back will seal up any holes or crevices that may be present. You can also apply a second layer of tape over the top if necessary. The purpose is to create a tight seal that won’t let anything get through – not even air!
Step 6: Test Roller Shutters
Now that your roller shutters are installed, it’s time to test them out. Open and close the shutter a few times to make sure everything is working properly. If you find that the shutter is not opening or closing smoothly, make adjustments as needed. You can also open the tension screws on either side of the hinges to loosen or tighten up the torsion springs for easier operation. You may also need to remove some slack from chains if they seem too tight.
Step 7: Final Touches
Now that the garage roller shutter is installed, it’s time for some final touches. Make sure the area around the shutter is clear of any obstacles. Then, test the shutter by opening and closing it a few times. Once you’re satisfied with how it works, you can enjoy the peace of mind that comes with knowing your garage is secure. To ensure safety and durability, we recommend having a professional install your garage roller shutters installation. The installation process should take no more than two hours and cost between $150-$300 per panel depending on the size of your garage door.
Step 8: Installation Complete!
Congratulations, you have now successfully installed your garage roller shutters! These shutters will provide years of reliable operation and security for your home. Thanks for following our guide, and feel free to contact us if you have any questions. Remember to always measure the width of the door opening before you purchase a new set of shutters.
The most common mistakes are buying a set that is too small or too large for the door opening size. In order to avoid these mistakes, make sure to measure both the height and width of the door opening before making a purchase.
