You can build an outdoor shower by following simple steps. Installing a drain that links to your home’s waste system is a prerequisite in certain areas. Additionally, the foundation must have a drain strainer and be slanted to direct water into the drain. If this is necessary, a concrete base is your best option because it will be simple to form and durable. The simplest solution is to let the water flow into a garden if you don’t need to control water runoff.
Construct a shower foundation
You will need to build an outdoor shower foundation unless you are fortunate enough to have a level area of land that drains properly or a deck. For functioning and safety, the ground must be flat and firm.
If your shower requires a drain, as we previously stated, make the base out of concrete or similar non-porous material. If a drain is not required, cement pavers or wood decking are your two alternatives for letting water seep into the earth. Additionally, some standalone shower systems come with a platform, allowing you to skip this step and shorten the installation process.
Construct the enclosure
The best time to bygg utedusch enclosure for privacy is right now, especially for the rear wall where the showerhead and valve will be mounted. If you decide to use hot water, build the rear wall out of wood, vinyl, or any other sturdy material that can handle a showerhead and heating unit.
Your creativity may truly shine in the enclosure. As long as you apply a waterproof sealant, you can create enclosures out of nearly anything, such as bamboo, corrugated metal, sliding doors, or even just a curtain.
Place the shower holder and valve in place.
Depending on whether you’re using a standalone shower, this step will either be the simplest or the trickiest. If so, all you need to do is put it in the desired location. After stabilizing it, connect the shower riser to a 6-foot metal post or piece of rebar that has been driven at least a few feet into the ground. If you decide to use a propane shower in its place, which often has a shower holder, be careful to position it high enough so that you can stand below it when it’s not in use. Make sure you provide a location for the propane tank. Use copper pipe clamps to fasten the valve and head of an outdoor shower to the wall.
Connect the water
Finally, you are prepared to connect the water, which is the most crucial component. When constructing a standalone shower — solar or propane — all you need to do is take a garden hose and screw it into a hose bib. Turn on the water and let the shower’s flow be controlled. If you choose a solar shower, the water won’t be warm enough to use until the heating reservoir has been exposed to direct sunshine for a few hours.
Winterize your shower by keeping it safe.
Not many people are aware of this, but while not in use, your outdoor shower will be exposed to the winter weather. According to your location, this implies you will need to protect it against cold weather. To avoid freezing and cracking the supply hoses and shower fixtures, the most crucial thing to do is to make sure your shower is completely empty. You have it simple if you buy a standalone shower. Just disconnect the garden hose and store the shower for the season.
Turn off the water supply, store the hose, open the duschhållare, and leave them open if your shower valve is mounted on the wall and linked to a heater. Winter protection will also be required for the shower enclosure itself. When it’s time to shut the shower for the year, dry the interior completely and cover the enclosure with a tarp, securing it with a rope or knot. Cover the shower pipes if an enclosure wasn’t built.
Although having an outdoor shower and shower holder may have appeared like a luxury reserved for the rich, everyone may design their own special shower to use in the summer. Whether you choose a basic standalone shower with simply cold water or go all out with a bamboo enclosure and gas heater, creating one only needs some forethought, patience, and the desire to learn.